Appearance: UsedFunctionality: WorkingDescription:============As pictured, an AppleAirPort Base Station. Includes base station and repaired power supply, no otheraccessories or cables are available.Warranty andReturns:=====================We understand thatthere may be compatibility issues, space constraints, or it just doesn’t lookperfect. This item can be returned within 14-days for ANY reason. However,shipping to and from is not refundable. Shipping:=========- Local pickup isalso available at no cost.- Most orders placedbefore 9am will ship the same day.Stock#:4037Wireless data rate◾Upto 11 Mbps (data rate depends on environment)Range◾Upto 168-foot (50 m) radius from the base station in typical use. Range varieswith site conditions.Frequency band◾2.4GHz spread spectrumRadio output power◾15dbm (nominal)Positioning options◾Desktop◾Wall(mounting bracket included)Compatibility◾Industry-standardIEEE 802.11b◾Wi-Ficertified◾Workswith Windows-based PCs and Mac computers (See Note 2)◾AirPortSetup Assistant to configure the computer and AirPort Base Station for Internetaccess◾AirPortAdmin Utility for base station network administration◾InternetConnect application for dialing support and to monitor connection status, turnAirPort on and off, change networks, and check signal quality (Mac OS X 10.1only)◾AirPortapplication to monitor connection status, turn AirPort on and off, changenetworks, and check signal quality◾AirPortmenu bar item to measure signal quality, change networks, and turn AirPort onand offAirPort Base Stationinterfaces◾RJ-11connector for built-in 56K V.90 modem for dialup Internet connections (See Note3.)◾AirPort◾Powerjack (12 V DC)◾RJ-45connector for built-in 10BASE-T Ethernet for connecting a DSL or cable modem(WAN, "wide area network")◾RJ-45connector for built-in 10/100BASE-T Ethernet for connecting to wired computers(LAN, "local area network")Note: Whenconnecting the AirPort Base Station (Dual Ethernet) to to another device usingEthernet, a crossover cable is not required. Both the WAN and LAN Ethernetports automatically detect the type of connection and switch the signalconfiguration as required.The Ethernet jacks do not accept telephone wire(RJ-11). This has been done to prevent confusion from misplugged wiring. TheEthernet jacks will not allow a telephone wire's clip to insert far enough tolock into place.Included software◾AirPortapplication - change networks and check signal strength (for Mac OS 9).◾AirPortControl Strip module - quickly measure signal strength or change networks (forMac OS 9).◾AirPortSetup Assistant - set up the computer for network access and set up an AirPortBase Station (for Mac OS 9 and X).◾AirPortAdmin Utility - base station network administration (for Mac OS 9 and X).◾DesigningAirPort Networks 2 PDF document◾AOLExtrasElectricalrequirementsNorth America andJapan◾Linevoltage: 100 V to 120 V AC◾Frequency:50 Hz to 60 HzEurope, Australia◾Linevoltage: 200 V to 240 V AC◾Frequency:50 Hz to 60 HzEnvironmentalrequirements◾Operatingtemperature: 32 F to 95 F (0 C to 35 C)◾Storagetemperature: -13 F to 140 F (-25 C to 60 C)◾Relativehumidity, operational: 20 to 80 percent◾Relativehumidity, storage: 10 to 90 percent, noncondensing◾Operatingaltitude: 0 to 10 000 feet (0 to 3048 m)◾Maximumstorage altitude: 15 000 feet (4572 m)Size and mass◾Diameter:6.9 inches (175 mm)◾Height:3.2 inches (80 mm)◾Mass(weight, without wall mount bracket): 1.25 pounds (565 grams)System requirementsFor Macintosh users◾AnApple computer with an antenna and AirPort Card◾MacOS 9.0.4 or later or Mac OS X 10.1 or laterFor PC users◾Atleast one AirPort-enabled Apple computer (to set up the base station)◾APC with a Wi-Fi-certified IEEE 802.11b
